Description
DVI-D Single Link Cable. For use with all modern digital monitors. projectors and TFT/LCD Flat Panel Displays. SXGA (1280 x 1024) and HDTV1080i (1920 x 1080) compatible. RF-BLOK shielded design. Connectors: DVI-D Single Link Male to DVI-D Single Link Male. 10 Year Warranty. LINDY Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group). ?? Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card. Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering – eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material – soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible Smaller overall dimensions which allows more room behind the host or peripheral Increased connector and mating strength – the 4 point reinforcement tabs on the RF-BLOK. attached to the connector. strengthens the pair as one
